Products
Position:
Home » Products » Plastic LED Road Studs For Bike Path or Park F1

Plastic LED Road Studs For Bike Path or Park F1

Thickness: Only 11mm
Warranty: 18 Months
Body material: PC(Japan Brand)
Visual distance: > 800m
Load Bearing: 20 Tons
Working Mode: Flashing or Constant
Waterproof: IP68
Shank: Without shank

Product Introduction

Plastic Road Stud Features:
•High brightness America brand led light with 100000 hours of working time.
•USA brand solar panel. 22% high conversion rate. Fast charge rate.
•Thickness only 11mm, Led Road Stud friendly to bicycle and motorcycle wheels.
•Anchor holes or the adhesive bond for dual fixation.
•Long life span 5-8 years.
•Led Road Stud accept OEM/ODM

 

plastic Road Stud color
Five colors for choice: White, Amber, Red, Blue, Green

Plastic LED Road Stud Parameters:

 

   Material: PC(Japan Brand)
    Power supply: USA Brand Flexible High Efficient Solar Panel 5.5V/80MA
    Battery: Lithium battery 3.2V/500MA
    Working model: Blinking or Constant
Charging at daytime and working automatically at night
    Life span: 5 years for lithium battery;
    LED colors: Yellow, White, Red, Green, Blue
    Resistance: 20T(static)
    Size: 114*90*11mm  (4.49″*3.54″*0.43″)
    Visual distance: >800M
    Water poof: IP68
    Carton Size: 2pcs/box;100pcs/ctn;weight:14.5kg;carton size:48*27*21.5cm
2pcs/box;100pcs/ctn;weight:31.97bs;carton size:18.90″*10.63″*8.46″

 

Plastic LED Road Studs For Bike Path
Plastic LED Road Studs For Bike Path

 

Application of LED Road Studs For Bike Path F1:

♥Schools and hospitals
♥Gardens
♥Deck and Dock
♥Walking paths
♥Bridge
♥Parks and campuses
♥For Decoration

 

How to install Aluminum Road Studs with shank F1:

1. Determine the installation location and distance, clean the surface of the Road Studs, and ensure that the Road Studs are installed on a flat road surface.
2. Clean the bottom of the led Road Studs and apply the epoxy glue evenly to the back of the stud.
3. Press the side with glue on the road, secure the position, wait for the glue to dry out.
4. Check within 2 hours of installation to ensure that all Road Studs are properly installed and do not bend or deform due to compression.
5. Please evacuate the installation isolation facility 6-8 hours after installing the Plastic Road Studs.