Advantages of LED Road Stud

LED Road Studs provide a good solution for a safe and sustainable infrastructure, providing road layout with superior distance visibility. The LED Road Studs is activated at the beginning of dusk. Once the morning sunlight intensity exceeds 100 lux, the light will stop and the battery will start to charge. They maintain light output throughout the annual cycle and have been proven to increase safety at night. Even on cloudy or rainy days, LED Road Studs will be effectively charged to 100% in about 3 hours.

The advantages of these LED Road Studs over reflective road studs are:

1. LED Road Studs to use the built-in sensor to automatically illuminate at dusk and recharge during the day.

The output power of the LED is> 100Hz, which can be seen within 900 meters. Thanks to the installation of LED Road Studs, we have a cable-free, therefore easy and fast possibility to make pedestrians pass more safely.

2. LED Road Studs use solar energy to drive the embedded LED lights.

Adding embedded LED lights to each Road Studs, by increasing the driver’s reaction time, makes these reflectors have significant advantages over the traditional road stud. Since the reaction time depends mainly on the vision, LED Road Studs can give drivers a reaction time of up to 30 seconds instead of the traditional road stud 3.2 seconds. Drivers with ten times higher-visibility can reduce the accident rate to 70%.

3. More obvious warning effect

The reflector effect of the ordinary reflective Road Stud in rainy or foggy weather is very poor, so the warning effect that people want can not be achieved. The LED Road Studs are built-in LED lamp beads, which have stronger penetration and will not be affected by rain and fog. In bad weather can still play a good guiding effect.

LED Road Studs are widely used in the basic road infrastructure sector, including the emphasis on dangerous curves, the introduction of traffic calming measures, marking bicycle lanes, and roundabouts. In addition, LED Road Studs are very suitable for harbor and recreational venues, such as piers, piers and footbridges, parking lots, and public plazas.